Tera Labs helps installers, designers and DIY builders answer the first questions of every solar project: will this panel work with this inverter, how many panels go in a string, and how many inverters does the whole array need? For a full system design, talk to our design team.
Where the data comes from
- Equipment specs: manufacturer datasheets, linked on every model page. A few values come from distributor listings and are marked as such.
- Design temperatures: ASHRAE 2017 extreme annual mean minimum dry-bulb temperatures for 1845 US stations, from Lawrence Berkeley National Laboratory's open-source vocmax project.
- City list: GeoNames (CC BY 4.0), US cities over 50,000 people, matched to the nearest station.
How the math works
- Cold-day Voc uses the NEC 690.7 manufacturer-coefficient method.
- Hot-day cell temperature scales the module's NMOT (or NOCT) rise to 1000 W/m².
- Vmp temperature coefficient comes from the datasheet, or is estimated as the Pmax coefficient minus the Isc coefficient.
- Current is checked per MPPT against the inverter's short-circuit limit, with bifacial rear gain from the datasheet (10% when none is given) and an optional NEC 125% factor.
- SolarEdge designs follow the optimizer datasheet's minimum and maximum string length and power-per-string rules.
Important
Results are estimates to speed up early design. Datasheets change, and local code and the authority having jurisdiction decide what is allowed. Confirm every design with the manufacturer's own sizing tool before ordering or permitting.