Home › Calculators › Replacement finder

Solar panel & inverter replacement finder

A panel is discontinued or out of stock? Find one with the same footprint that still works in the existing strings. An inverter failed? Find current models that take the strings exactly as they are wired.

How it works

Panel mode compares every panel in the database with the one on the roof: length and width (so racking, clamps and the layout still fit) and whether it works on the same inverter at the same string length. Voltage is checked at your record low and a 40 °C hot day with the NEC 690.7 method, the same math as the String Sizer.

Inverter mode takes the strings as they are wired today, panels per string and number of strings, and lists inverters whose voltage window, MPPT current and DC power limits accept them. One-unit options come first.

A swap also has to keep rapid shutdown (NEC 690.12), the interconnection breaker and the monitoring working, so confirm those before ordering.

Questions

Can I mix a new panel model into an existing string?

Only if its current (Imp) is close to the old panel’s, or the whole string runs at the weakest panel’s current. Most installers replace a full string or put the new panels on their own MPPT input.

What if no panel in the list is the same size?

Check the racking: many rails allow a different panel length if the clamp zones still land on the frame. Otherwise move the new panels to their own row.

Estimates only, based on NEC 2020/2023 tables. Check the code edition your jurisdiction uses, the equipment datasheets and your AHJ before you build.