Home › Calculators › Roof fit

How many panels fit on my roof?

Enter one roof plane and its setbacks, pick a panel, and see how many fit in portrait and landscape, with a drawing of the layout.

How it works

The usable area is the roof plane minus the ridge, eave and side setbacks. Panels are then packed in rows and columns with the clamp gap between them, once in portrait (long side up the slope) and once in landscape, and the layout with more panels wins.

Setbacks: the International Residential Code (R324.6) and Fire Code (1205) call for 36 in access pathways from eave to ridge on residential roofs and a clear strip below the ridge, often 18 in when the array covers a third of the roof or less, 36 in above that. Local rules vary, so use your AHJ's numbers.

The count is geometric. Vents, skylights, chimneys, shade and the racking maker's edge zones can reduce it.

Questions

How many solar panels fit on a 1,000 sq ft roof?

Typical 400–450 W panels are about 21–22 sq ft each, so a fully usable 1,000 sq ft could take around 40. After setbacks, vents and orientation, most homes use roughly half to two-thirds of the roof.

Is portrait or landscape better?

Whichever fits more panels on your plane. Portrait is more common on houses because rails run across the rafters; landscape can fit an extra row on short, wide planes.

Estimates only, based on NEC 2020/2023 tables. Check the code edition your jurisdiction uses, the equipment datasheets and your AHJ before you build.