Home › Calculators › Hot-day power loss

Hot-day power loss calculator

Solar panels lose power as they heat up. Pick a panel and a temperature to see the cell temperature and real output, and how every panel in the database compares.

How it works

Cells run hotter than the air. The datasheet's NMOT (nominal module operating temperature) gives the rise: cell temperature = air + (NMOT − 20) × sunlight ÷ 800 W/m². Power then changes by the Pmax temperature coefficient for every degree above 25 °C, the test temperature.

Example: a panel with NMOT 43 °C and −0.30 %/°C on a 38 °C day in full sun runs at about 67 °C, which costs roughly 12.5% of its rated power.

N-type TOPCon and heterojunction cells usually have coefficients around −0.24 to −0.30 %/°C, older PERC around −0.34 to −0.37 %/°C, which is why they lose less on hot days.

Questions

How much power do solar panels lose in heat?

Typically 0.25–0.4% per °C of cell temperature above 25 °C. On a hot summer afternoon cells reach 60–70 °C, so 10–15% below the label is normal.

Which solar panels are best for hot climates?

Look for a Pmax temperature coefficient close to zero (−0.24 to −0.30 %/°C) and a low NMOT. The table under the calculator ranks every panel in the database.

Estimates only, based on NEC 2020/2023 tables. Check the code edition your jurisdiction uses, the equipment datasheets and your AHJ before you build.